Contact UsBiofuel (52) Bulk Handling (377) Sawmilling (387)

Category:  Biofuel
Sort By
Keyword
Search In

Biofuel

Avon Fan
Avon Fan
Code: 1366

Avon Fan 30cfm 1480 rpm Inlet 630mm Ø Outlet 540mm x 470mm 75kW Has surface rust, but very sound housing.

 
Donaldson Torit Baghouse
Donaldson Torit Baghouse
Code: 1371

Currently erected on site (No rotary valve or fan).

 
Erjo HSMF 704
Erjo HSMF 704
Code: 2104

Erjo drum chipper type HSMF 704 from 2006 with horizontal infeed. Drum width: 700 mm Drum diameter: 600 mm No of knives: 4 Size of electrical motor: 75 kW Capacity 20-50 m3 chips per hour

 
Fan
Fan
Code: 1367

Fan Inlet 500mm Ø Outlet 450mm x 500mm 22kW

 
Paul Test
Paul Test
Code:


 
SOLD - Mikropul Baghouse & Fan - SOLD
SOLD - Mikropul Baghouse & Fan - SOLD
Code: 1429

• Serial Number AV3674-2066 • Model 55W-10-15 • Explosion vent included for extra safety

 
WSM Hogger - Refurbished
WSM Hogger - Refurbished
Code: 2187

AUD $ 20,000 SPECIAL West Salem Machinery Hogger Model 2432B Serial No. 5901104

 

New Equipment - Hoggers & Chippers

Forano Disc Chipper
Forano Disc Chipper
Code: MA-32-EForanoDiscChipper

The USNR Forano Disc Chipper is available in four sizes and three configurations to meet your specific wastewood processing requirements.  Each model can also accomodate bottom, rear and top discharge for maximum flexibility.

 
HBS Bark Hogger
HBS Bark Hogger
Code: HBSBarkHog

630-36-EU

 
HBS Bark Hogger
HBS Bark Hogger
Code: HBSBarkHoga

840-44-EU

 
HBS Bark Hogger
HBS Bark Hogger
Code: HBSBarkHogb

840-64-EU

 
HBS Bark Hogger
HBS Bark Hogger
Code: HBSBarkHogc

1050-26-EU

 
HBS Bark Hogger
HBS Bark Hogger
Code: HBSBarkHogd

1260-34-EU

 
HBS Bark Hogger
HBS Bark Hogger
Code: HBSBarkHoge

1260-32-EU

 
HBS Bark Hogger
HBS Bark Hogger
Code: HBSBarkHogf

1460-32-EU

 
HBS Bark Hogger Horizontal Infeed
HBS Bark Hogger Horizontal Infeed
Code: HBSBarkHogHorizontalInfeed


 
Horizontal Chipper System
Horizontal Chipper System
Code: E-036 HorizontalChipper

The Horizontal Chipper is a workhorse designed for high-production mills.  Conical chip heads operate in the vertical plane which reduces side chipping forces, resulting in smoother feeding, better quality chips and longer-lasting knives.

 
Norman Disc Chipper
Norman Disc Chipper
Code: MA-33-ENormanDiscChipper

The exclusive, tested design of the USNR Norman Chipper is bringing greater profits to chip manufacturers around the world. Truly uniform chips are the result of the USNR Norman Chipper’s continuous cutting action that makes it the only chipper of its kind!

 
Optimised Chipper Spout
Optimised Chipper Spout
Code: MA-28-EOptimisedChipperSpout

In a continued commitment to innovation, USNR has implemented several design changes to the Forano style chipper spout that improve chip quality and reduce maintenance costs.

 
Rotary Hog
Rotary Hog
Code: MA-31-ERotaryHog

When it comes to shredding waste material, there just isn’t any better value than USNR’s Rotary Hog. These rugged machines provide maximum production at the lowest cost per ton.

 
(NEW) ERJO 165 SN Chipper
(NEW) ERJO 165 SN Chipper
Code: ERJO-165SN

As agents of ERJO, we are proud to be able to provide: ERJO 165 SN Chipper This chipper has many features, including: • Handles a wide range of materials • Produces uniform size fuel chips • Ideal for automatic furnace feeding • Self-feeding – safe ...

 
(NEW) ERJO 200 SN Chipper
(NEW) ERJO 200 SN Chipper
Code: ERJO-200SN

As agents for ERJO, we are proud to be able to provide: ERJO 200 SN Chipper This chipper has many features, including: • Handling a wide range of materials • Produces uniform size fuel chips • Ideal for furnace feeding • Self-feeding – safe ...

 
(NEW) ERJO Type HSM Chipper Range Horizontal Feed
(NEW) ERJO Type HSM Chipper Range Horizontal Feed
Code: ERJO-HSM

As agents of ERJO, we are proud to provide: ERJO Type HSM Horizontal Feed Chipper Range The ERJO Horizontal Feed Chipper Range produces pulp and board chips as well as fuel chips from edgings, slabs and trimmings. The machines are available in three (3) ...

 
(NEW) ERJO Type VS Drop Feed Chipper Range
(NEW) ERJO Type VS Drop Feed Chipper Range
Code: ERJO-VS

As agents for ERJO, we are proud to provide: ERJO Type VS Chipper This ERJO Drop Feed Chipper produces pulp and board chips as well as fuel chips from edgings, slabs and trimmings. The machines are available in three (3) styles: • The Type VSF – with fan for ...

 

Used Equipment

Aireng Fan
Aireng Fan
Code: 1368

Brand – Aireng Motor -75kW RPM -1485 Inlet - 950Ø Outlet -660mm x 870mm Addition - Damper on outlet Rating - 25,000CFM/11800MPS

 

Used Equipment - Fuel Handling

Bruks Feed Hopper
Bruks Feed Hopper
Code: 3074

Bruks feed hopper with hydraulic dive, 3 kW. Volume: 6 m3.

 
Erjo Feed Hopper Type M10
Erjo Feed Hopper Type M10
Code: 3073

Erjo feed hopper type M10. Electric drive 1,5 kW. Capacity 10-30 m3/h.

 
Vibrating Conveyor Bruks
Vibrating Conveyor Bruks
Code: 3141

Vibrating conveyor made by Bruks. Length: 24 meter. Width: 450/650 mm. Incl. metal detector and built in screen.

 

Used Equipment - Hoggers, Chippers & Shredders

SOLD - Timber Tech White Pointer TT3 Waste Reducer with discharge screw - SOLD
SOLD - Timber Tech White Pointer TT3 Waste Reducer with discharge screw - SOLD
Code: 1437

- Comes with Augar screw conveyor - Hydraulic power pack included - Can handle waste up to one metre in length - Suitable for a range of industrial applications such as dry mill waste, plywood, particle board, cardboard and paper. Execution of Machinery o Power ...

 
Arasmith Industries Lily Pad Chipper
Arasmith Industries Lily Pad Chipper
Code: 1454

64” x 50” mouth opening Located in Country NSW

 
Bruks 1503 M Disc Chipper
Bruks 1503 M Disc Chipper
Code: 3170

Disc chipper chipper type Bruks 1503 M. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Disc diameter 1480 mm Infeed opening, 420x300 mm Number of knives 3 pcs Number of upper feed rolls 4 pcs Number of upper rolls 6 pcs Chips 30 - 50 ...

 
Bruks 800CM Chipper
Bruks 800CM Chipper
Code: 3208

- Reconditioned - Bottom Outlet - 55 k/w motor

 
Bruks 803 CS Drum Chipper
Bruks 803 CS Drum Chipper
Code: 3172

Drum chipper type Bruks 803 CS incl fan. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Drum diameter 800 mm Infeed opening 540x400 mm Number of knives 4 pcs Chips 30 - 60 m3/h Rated power 55 kW Rated fan power 10 kW

 
Bruks 820 CM Chipper
Bruks 820 CM Chipper
Code: 2184

BRUKS stationary drum chippers are processing different kinds of input materials, like logs, slabs, sawmill wastes, butt ends, veneer wastes and other industrial wood wastes in all wood industry segments.

 
Bruks 820 CM Chipper
Bruks 820 CM Chipper
Code: 2185

BRUKS stationary drum chippers are processing different kinds on input materials, like logs, slabs, sawmill wastes, butt ends, veneer wastes and other industrial wood wastes in all wood industry segments.

 
ERJO 165 Drum Chipper with Feed Conveyor and Waste Hopper
ERJO 165 Drum Chipper with Feed Conveyor and Waste Hopper
Code: 1447

Chipper comes complete with wood waste hopper and feed conveyor. This unit produces 7-10m3 of woodchip per hour

 
Morbark 48
Morbark 48" Chipper
Code: 1420

- Length: 56” - Width: 52” - Height: 55” - Weight: 7,300lbs (approx. 3311kg) - Capacity: 11” roundwood - Spout; 26” dia x 17” wide - 48” Disc diameter - 6 Knives - Max rpm of 875 - Rear discharge "As is, where is" condition

 
Morbark 56
Morbark 56" Chipper
Code: 1421

- Length: 67” - Width: 58” - Height: 65” - Weight: 8,200lbs (approx. 3720 kg) - Capacity: 15” Roundwood - Spout; 32” diag x 22” wide - 58” Disc diameter - 6 Knives - Max rpm of 725 - Bottom discharge "As is, where is". Used Condition.

 
Morbark Mobile Chipper
Morbark Mobile Chipper
Code: 1467

Includes spare parts Machine Ex. Country SA

 
SOLD - Bruks 1200 M Disc Chipper - SOLD
SOLD - Bruks 1200 M Disc Chipper - SOLD
Code: 3171

Disc chipper chipper type Bruks 1200 M. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Disc diameter 1200 mm Infeed opening, 370x200 mm Number of knives 2 pcs Number of upper feed rolls 1 pcs Chips 25 - 35 m3/h Rated power 37 kW Weight 2 350 ...

 
SOLD - Bruks 1500 CS Drum Chipper - SOLD
SOLD - Bruks 1500 CS Drum Chipper - SOLD
Code: 3169

Drum chipper type Bruks 1500 CS incl. 2 Screw conveyors after the machine, approx. 5 and 12 m. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Drum diameter 1500 mm Infeed opening, 870x620 mm Number of knives 8 pcs Chips 100 - 300 m3/h Rated ...

 
SOLD - Bruks 813 CS Drum Chipper - SOLD
SOLD - Bruks 813 CS Drum Chipper - SOLD
Code: 3173

Drum chipper type Bruks 813 CS incl fan. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Drum diameter 800 mm Infeed opening 540x400 mm Number of knives 4 pcs Chips 30 - 60 m3/h Rated power 75 kW Rated fan power 10 kW

 
SOLD - ERJO 165 SN - SOLD
SOLD - ERJO 165 SN - SOLD
Code: 3167

Drop feed chipper type Erjo 165 SN. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Reconditioned.

 
SOLD - ERJO 165SN Drum Chipper - SOLD
SOLD - ERJO 165SN Drum Chipper - SOLD
Code: 1419

- Capacity cum.m chips/hx: 3-5 5-7 7-10 [x = depends on material fed in] - Required motor rating: 22 30 37 - Weight including motor (approx. kg): 900 960 1020 - Feed opening height x width mm: 275 x 345 - Discharge opening height x width mm: 195 x 370 - ...

 
SOLD - ERJO 204MA - SOLD
SOLD - ERJO 204MA - SOLD
Code: 3168

Drop feed chipper type Erjo 204 MA. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Reconditioned. Electrical motor 55 kW. 4 knives. Capacity appr. 15-25 m3 chips/hour

 
SOLD - Fulghum Chipper - SOLD
SOLD - Fulghum Chipper - SOLD
Code: 2189

AUD $25,000 SPECIAL 6 Knife Disc chipper - 54-6K-HFVD - 750 rpm - Driven by a 160kw, 990rpm motor - Soft Starter

 
SOLD - Weima WL-4 Shredder with 40mm Screen - SOLD
SOLD - Weima WL-4 Shredder with 40mm Screen - SOLD
Code: 1433

- Modified large hopper - 40mm Screen - Includes conveyor - Includes 18 k/w motor

 
Timber Tech Bark Hog White Pointer
Timber Tech Bark Hog White Pointer
Code: 1443

Timber Tech Bark Hog White Pointer Ex. Country Victoria Technical data 30 K/w on drum Hopper size: 1m x 0.5m Contact for more technical data.

 
Timber Tech Wood Hog White Pointer
Timber Tech Wood Hog White Pointer
Code: 1444

Technical data 30 k/w motor on chipper drums 11 k/w motor on hydraulic power pack 1.2m x 1.06m hopper

 

Used Equipment - Screening

Timber Tech Chip Screen Model RS1800
Timber Tech Chip Screen Model RS1800
Code: 1430

• Recently painted • 1800mm2 screen • Located Skookum Warehouse, SA, Australia • As is, where is • Serial Number: TTS-99-13540

 

Used Equipment - Fuel Storage

SOLD - Chip & Sawdust Storage Bin - SOLD
SOLD - Chip & Sawdust Storage Bin - SOLD
Code: 1434

- 90-95m3 chip storage - 60-65m3 sawdust with lower gauge walls - Clamshell opening - As is, where is

 
SOLD - Chip Storage Bin - SOLD
SOLD - Chip Storage Bin - SOLD
Code: 1453

Approx. 50T Capacity 4.8 x 4.6m Clearance Includes Operator platform for bin controls. Auger in top. Ex. Country NSW