Contact UsBiofuel (52) Bulk Handling (377) Sawmilling (387)

Category:  Sawmilling
Sort By
Keyword
Search In

Sawmilling

2 Knee McKeeCo Carriage
2 Knee McKeeCo Carriage
Code: 1398

2 Knee McKee Co Carriage - Cable Drive - Panogram Arm - 4.2m Long Carriage Located in Australia

 
3 Knee Kockums Carriage
3 Knee Kockums Carriage
Code: 1399

3 Knee Kockums Carriage - Cable Drive - Patograph Arm - Includes DC Cable Drive Motor 110kW Located in Australia

 
6-Spindle Ledinek Planer & Moulder
6-Spindle Ledinek Planer & Moulder
Code: 5002

6-Spindle Ledinek Planer & Moulder Profiles 220 6V-S100 This robust machine is suitable for production of different moulded wooden elements in joinery and building industry. PROFILES provides excellent moulded or planed surface finish on different ...

 
Avon Fan
Avon Fan
Code: 1366

Avon Fan 30cfm 1480 rpm Inlet 630mm Ø Outlet 540mm x 470mm 75kW Has surface rust, but very sound housing.

 
BioLuma™ 2900LV Sensor
BioLuma™ 2900LV Sensor
Code: E-215 BioLuma

HD colour vision combined with HD laser profiling at the highest scan rate - the best overall performance for sawmill transverse scanning Advanced Transverse Scanning: HD Colour Vision + HD Laser Profiling HD colour vision and HD laser profiling in a single, ...

 
BM&M Wood Chip Screen
BM&M Wood Chip Screen
Code: 1402

BM&M Wood Chip Screen (2x available) Purchased 1996

 
Boiler
Boiler
Code: 1372

Age: 2005 Model no: 3MW 1100 Maxitherm Low Water Level: 40mm of visible glass Extra Low Water Level: 25mm of visible glass Boiler High Water: +80mm from half glass Normal Water: Half glass Safety valve setting: 10.3 bar Steam modulating controller: 8.5 ...

 
Brewer Machinery Combination Edger
Brewer Machinery Combination Edger
Code: 1428

Machinery Consists of: • Brewer Docking Saw • Brewer Infeed (with kicker to rotate cant) • Brewer Combination Saw • Spare Saw guides and saws • Electrics

 
Bruks Butt Reducer
Bruks Butt Reducer
Code: 2114

Bruks Butt Reducer Fully Refurbished, Cleaned and Painted - All Bearings Replaced - New Diablo Roller Flights

 
Cambio 460 Debarker (18
Cambio 460 Debarker (18")
Code: CAMBIO-460-DEBARKER

Cambio 460 is a debarker for small logs up to 460mm (18"). It operates at feed speeds up to 90 m/min. (295 feet/min.) Its simplicity, reliability, low service requirement and operating costs makes Cambio 460 the winner in its class for sawmills and log yards around ...

 
Chip Bins
Chip Bins
Code: 1404

Two Chip Bins available after Christmas.

 
Clam Shell Storage Bin with Bucket Elevator
Clam Shell Storage Bin with Bucket Elevator
Code: 1435

- Double clam shell bin - Height of the bin is around 6.4m high x 3.0m wide x 6.5m long - Approx. 110-120m3 capacity - Has a levelling screw mounted to the top, hydraulic operation for the clam shell doors, and platforms to access all drive motors

 
CML SCA 450 T 500 Multirip Ripsaw
CML SCA 450 T 500 Multirip Ripsaw
Code: 2200

Serial Number: 20694 Main Motor HP: 100 Maximum Cutting Thickness: 130 mm Blade Dia. max/min: 400/300 mm Contact for more technical data.

 
Donaldson Torit Baghouse
Donaldson Torit Baghouse
Code: 1371

Currently erected on site (No rotary valve or fan).

 
Edwards Chip Screen
Edwards Chip Screen
Code: 1403

Edwards Wood Chip Screen

 
Enerpat YT-145 Log Shavings Machine
Enerpat YT-145 Log Shavings Machine
Code: 1427

Bought new, with only two weeks of use. - Perfect for shaving round woods - Ideal for firewood 12-14cm - 100% Automatic - Conveyor carrying shavings out - Blades changed very easily - Anti-jamming system - Safety Alarm - CE certified Specs: Max. Log Input ...

 
Erjo HSMF 704
Erjo HSMF 704
Code: 2104

Erjo drum chipper type HSMF 704 from 2006 with horizontal infeed. Drum width: 700 mm Drum diameter: 600 mm No of knives: 4 Size of electrical motor: 75 kW Capacity 20-50 m3 chips per hour

 
Fan
Fan
Code: 1367

Fan Inlet 500mm Ø Outlet 450mm x 500mm 22kW

 
Gibson One Man Bench
Gibson One Man Bench
Code: 1460

Gibson One man Bench Has been out of operation for 5 years but kept undercover. Includes a hydraulic powerpack. Machinery as is, where is.

 
IWD Tital VK-10 Strapping Machine
IWD Tital VK-10 Strapping Machine
Code: 2186

AUD $22,000 SPECIAL Strapping Machine, Height 3400mm - Width 2100mm

 
McCormack Demby Timber - Site & Equipment
McCormack Demby Timber - Site & Equipment
Code: 1378

Site with Log Yard, Sawmill, Drymill, Reman, Heat Plant, Kilns and 50 Acres of land as a Going Concern

 
Pressure Treatment Plant
Pressure Treatment Plant
Code: 1441

Timber Treatment Plant Unknown pressure cylinder Stainless drip tank 2x21,000c working tanks “base of cylinder” Electrical operators console 3 x 1000c Tots with CCCA ( now mixed in working tanks) Ex. Country QLD

 
SOLD - Mikropul Baghouse & Fan - SOLD
SOLD - Mikropul Baghouse & Fan - SOLD
Code: 1429

• Serial Number AV3674-2066 • Model 55W-10-15 • Explosion vent included for extra safety

 
SOLD - Miltec MTS 1500 Bed Grinder - SOLD
SOLD - Miltec MTS 1500 Bed Grinder - SOLD
Code: 2120

Miltec MTS 1500

 
SOLD - MVM Capri AF 1500 Magnetic Bed Grinder - SOLD
SOLD - MVM Capri AF 1500 Magnetic Bed Grinder - SOLD
Code: 2121

MVM Capri AF 1500 Magnetic Bed Grinder

 
SOLD - Scancore Scanner and Weining Rainman Multi-Rip Saw Profirip 450 - SOLD
SOLD - Scancore Scanner and Weining Rainman Multi-Rip Saw Profirip 450 - SOLD
Code: 1401

Scancore Scanner Weining Rainmann Multirip Saw - Profirip 450 Conveyors to Suit EXCELLENT USED CONDITION

 
Stratoplan High Speed Planing Machines
Stratoplan High Speed Planing Machines
Code: Stratoplan

Planing at Tempo 450 to 1000 m/min Great features that make woodworking accurate and perfect.

 
T720 OPT (Omga) Optimised Docker
T720 OPT (Omga) Optimised Docker
Code: 1379

Programmable automatic upstroking machine for defecting and optimising wood.

 
TasEng Edger
TasEng Edger
Code: 1400

TasEng Edger and Set Works - 4 Saws (1 fixed and 3 moving) - Outfeed Rollcase - Manual Infeed - Dust Extraction Fan - Hydraulics and Controls Located in Australia

 
WSM Hogger - Refurbished
WSM Hogger - Refurbished
Code: 2187

AUD $ 20,000 SPECIAL West Salem Machinery Hogger Model 2432B Serial No. 5901104

 

New Equipment

Surround Systems TWA 2000 Series
Surround Systems TWA 2000 Series
Code: TWA-2000-Series

The TWA-2000 Surround Metal Detector Systems with proven MP-4 Digital Technology provide superb reliability and unmatched performance. The TWA-2000 Series Metal Detectors are the number one systems in the industry and they are proven to be the best investment you will ...

 

Used Equipment

LSI Stacker
LSI Stacker
Code: 1394

LSI Stacking system including: Unscrambler Singulator High Low Chain Alternate ending Adjustable layer maker Layer forks Hoist Outfeed Packet Deck Electrics and controls Building The stacker and building is available for immediate sale and ...

 
Aireng Fan
Aireng Fan
Code: 1368

Brand – Aireng Motor -75kW RPM -1485 Inlet - 950Ø Outlet -660mm x 870mm Addition - Damper on outlet Rating - 25,000CFM/11800MPS

 
Flue GAs Grit Arrestor
Flue GAs Grit Arrestor
Code: 1374

Age: 2000 Model No: Vortex Condition: Excellent Recent Repairs: 2 new bottom cyclone cones

 
Joulin Vacuum Lift 2
Joulin Vacuum Lift 2
Code: 3085

Joulin vacuum lift 2 Joulin type TS 1000 Vacuum lift with 3 heads. Have been used for board length 3,5 m.

 
Makor Spray Line
Makor Spray Line
Code: 1458

Y.O.M. 1997 Located Country QLD.

 
Vitech Grading Stations
Vitech Grading Stations
Code: 3088

Vitech grading stations 2 grading stations for sorting lines. Manufactured by Vitech AB. Used for grading of boards and centre pieces in a sorting line.

 
Waco Siba
Waco Siba
Code: 3084

Waco Siba Waco Siba knife adjusting device.

 

New Equipment - Log Processing

LASAR™ 3D Lasar Scanning Sensor
LASAR™ 3D Lasar Scanning Sensor
Code: OP-04-ELasar

Full coverage 3D scanning sensor with unparalled resolution and data densityThe LASAR™ sensor is a unique and rugged, full-coverage hig-resolution 3D scanner that is ideal for close coupled sawing systems and large transverse deck bucking systems.  ...

 
Log Bucking Optimizer
Log Bucking Optimizer
Code: NM-OP-07-ELogBuckingOptimizer

The Newnes-McGehee (NM) Bucking Optimiser is the ideal companion for NM primary breakdown and curve sawing optimisers. The bucking optimiser uses complete optimisation algorithms rather than lookup tables to ensure optimum value recovery. Curved logs can be bucked to ...

 
MillExpert Log Optimizer System
MillExpert Log Optimizer System
Code: OP-19-ELogOptimizer

Provides more value than any other systemThe Log Optimiser is part of USNR's MillWide suite of optimisation products.  It combines dense 3D scan data with the power of today's high-speed computers to let you get the maximum value from every log.

 
MillWide Bucking Optimiser System
MillWide Bucking Optimiser System
Code: OP-02-EBucking

Full 3D modeling and optimisation capabilities for maximum valueWith more features, capabilities and scanning options than any other system in the industry, the MillWide Bucking Optimiser system combines dense 3D scan data with the power of today's high speed computers ...

 
Smart TriCam™ Lineal Scanning System
Smart TriCam™ Lineal Scanning System
Code: OP-06-ESmartTriCamLinealb

Most Accurate and Highest-Density 3D Lineal Scanning System in the IndustryThe Smart TriCam lineal scanning system provides complete profile measurements of objects moving longitudinally through a set of scanners.  Smart TriCam sensors are available in single or ...

 

Used Equipment - Engineered Wood Products

Finger Jointing Line with Mechanisation
Finger Jointing Line with Mechanisation
Code: 5001

Finger Jointing Machinery and Mechanisation Grecon 1982-1988

 
SOLD - Ledinek Parquetry Line PA3 - SOLD
SOLD - Ledinek Parquetry Line PA3 - SOLD
Code: 5003

Ledinek Parquetry Line Model PA3 Y.O.M: 2017 PA3 production line has been developed for the production classic parquet of the highest quality. This line’s high production capability is its main advantage. TECHNICAL DATA Working dimensions-product ...

 

Used Equipment - Log Processing

Log Sort 2x7
Log Sort 2x7
Code: 3207

Log Sorting 2 x 7 pockets + waste pocket. Extra pockets can be added. Sawco measuring equipment from 2011-12. Metal detector. Log Crane. Frequency speed control on log haul.

 
SOLD - Log Sorting 2x18 - SOLD
SOLD - Log Sorting 2x18 - SOLD
Code: 3106

Log sorting line 2x18 boxes incl. Rema electronics. 1. Log deck. 2. Scraper conveyor and belt conveyors for cleaning under log deck. 3. Step feeder. 4. Log haul conveyor. 5. Metal detector with conveyor. 6. Sorting conveyor ...

 

New Equipment - Sawmills

BioVision System
BioVision System
Code: OP-23-E


 
Cambio Ring Debarker
Cambio Ring Debarker
Code: E-031 CambioRingDebarker

Cambio Ring Debarker - 18" - 24" - 30" Rugged - Dependable - Economical

 
Debarker Self-Centering Infeed Conveyor
Debarker Self-Centering Infeed Conveyor
Code: E-063 Debarker Infeed Conveyor

The self-centering infeed conveyor is a proven and effective method of centering the log to the debarker. The machine positions the log in both the horizontal and vertical planes, centering the log based on diameter, not weight. This enables it to maintain a true ...

 
Dynastar™
Dynastar™
Code: OP-22-E


 
Edger Maximizer System
Edger Maximizer System
Code: MA-06-EEdgerMaximizerSystem

Unscrambler - Transfer - Scanner - Infeed - EdgerThe USNR Edger Maximiser System is a complete package made up of state of the art modules

 
Extended Length Infeed
Extended Length Infeed
Code: E-064 ELI

Selecting the proper infeed is a critical step in the pursuit of maximum log recovery. The right infeed will deliver your log in position to make the best first cut; a cut that influences every board retrieved from the log. USNR's Extended Length Infeed (ELI) system ...

 
Forano Chip Screen
Forano Chip Screen
Code: MA-46-E

USNR's Forano Chip Screen is a high capacity screen that allows your mill to take advantage of an important source of income: wood chips. The Forano chip Screen requires minimal maintenance, so you can spend your time and budget elsewhere.

 
Forano Disc Chipper
Forano Disc Chipper
Code: MA-32-EForanoDiscChipper

The USNR Forano Disc Chipper is available in four sizes and three configurations to meet your specific wastewood processing requirements.  Each model can also accomodate bottom, rear and top discharge for maximum flexibility.

 
GenII™ Gang
GenII™ Gang
Code: E-093 GenIIGang

GenII is the next step in the evolution of shape sawing designed by the pioneers of optimized curve sawing technology. Newnes- McGehee’s GenII gang offers many improvements to this already proven technology.

 
High Strain Horizontal Bandmills
High Strain Horizontal Bandmills
Code: NM-MA-31-EHorizontalResawBandmills

Newnes-McGehee has developed simple high strain bandmills to meet any application for horizontal resaws. Thes bandmills offer hig accuracy and maximum production, yet the simple design assures minimum maintenance. They are available with 5' or 6' overhung wheels, and ...

 
High Strain Single Bandmills
High Strain Single Bandmills
Code: NM-MA-29-ESingleBandmills

Newnes-McGehee has developed simple, yet multi-functional high strain bandmills for headrigs.  These bandmills offer high accuracy and maximum production, yet the simple design assures minimum maintenance.  They are available with 6' or 7' overhung wheels.

 
High Strain Twin/Quad Bandmills
High Strain Twin/Quad Bandmills
Code: NM-MA-30-ETwin-QuadBandmills

Newnes-McGehee has developed simple, yet multi-functional high strain bandmills to meet any application for double length infeeds, sharp chain systems and resaws.  These bandmills offer high accuracy and maximum production, yet the simple design assures minimum ...

 
Horizontal Chipper System
Horizontal Chipper System
Code: E-036 HorizontalChipper

The Horizontal Chipper is a workhorse designed for high-production mills.  Conical chip heads operate in the vertical plane which reduces side chipping forces, resulting in smoother feeding, better quality chips and longer-lasting knives.

 
HSS System
HSS System
Code: E-023 HSS System

Horizontal Shape Sawing SystemThe USNR Horizontal Shape Sawing (HSS) system is the next generation of curve sawing technology that solves many of the problems associated with traditional curve sawing machines, including issues with accurace, recovery, overfeeding ...

 
Knuckle Turner Infeed
Knuckle Turner Infeed
Code: E-028 KTI

Single Length Infeed with Integrated Log TurningThe USNR Knuckle Turner Infeed.  With its small footprint, integrated log turning and accurate Slew / Skew positioning, this is the obvious choice for any small log line.

 
L&B Air Strain Bandmill
L&B Air Strain Bandmill
Code: E-227 LandBAirStrainBandmill

King of Bandmills, the Letson & Burpee Air Strain Bandmill from USNR

 
LineMaster G3™
LineMaster G3™
Code: OP-10-ELineMasterG3

Hardwood Lineal Edger OptimiserUSNR brings you the future of optimisation technology with the LineMaster G3™.  Packed with features that ensure the highest fiber recovery with the ability to control the appearance of your products for maximum grade ...

 
Log Positioning Infeed
Log Positioning Infeed
Code: E-099 SL3000 LogPositioningInfeed

The log positioning infeed system accurately determines the shape of the log, calculates the highest-value cutting solution, then accurately rotates, positions and transports the log through the cutting tools.

 
MillExpert Edger Optimizer System
MillExpert Edger Optimizer System
Code: OP-18-EEdger

Full coverage, high-density 3D scanning for lineal and transverse applications

 
MillExpert Log Turner Optimiser System
MillExpert Log Turner Optimiser System
Code: OP-13-ELogTurner

Programmable Turn Increments Along with Risk and Stabilikty Analysis to Insure the Best Turn on Every Log

 
MillExpert Trimmer Optimizer System
MillExpert Trimmer Optimizer System
Code: OP-20-ETrimmer

Full coverage, high-density 3D scanning and many configurable options offer superior board control.Combining dense 3D scan data with the power of today's gigh-speed computers, the MillExpert Trimmer Optimiser lets you get the maximum value from every board.  ...

 
MillWide Cant Optimizer System
MillWide Cant Optimizer System
Code: OP-15-ECant

Combining dense 3D scan data with the power of today's high-speed computers, the MillWide Cant Optimiser system lets you get the maximum value from every cant.  The complete solution indludes scanning, optimisation and information management along with full ...

 
MillWide Carriage Optimizer System
MillWide Carriage Optimizer System
Code: OP-16-ECARRIAGE

Simultaneous 3D front and back side scanning for hardwood and softwood applications.The LASARTM based MillWide Carriage Optimiser combines dense 3D scan data with the power of today's high-speed computers to let you get the maximum value from every log.

 
MillWide Control Systems
MillWide Control Systems
Code: OP-07-EMillWideControlSystems

USNR Control Systems feature the extremely efficient Factory Wired System (FWS) of distributed I/OUSNR's Factory Wired System (FWS) is a revolutionary PLC system based on a distributed I/O system architecture.  The system uses Allen-Bradley ControlLogix ...

 
MillWide End-Dogging Carriage Optimiser System
MillWide End-Dogging Carriage Optimiser System
Code: OP-21-EEDCCarriage

Simultaneous 3D front and back side scanning for hardwood and softwood applicationsThe LASARTM based End-Dogging Carriage optimiser combines dense 3D scan data with the power of today's high-speed computers to let you get the maximum value from every log.

 
Millwide Web System
Millwide Web System
Code: OP-14-EMILLWIDEWEB

Data Mining and Distribution System Provides Instant Analysis of Profit and Loss Centers

 
MV Ring Debarker
MV Ring Debarker
Code: E-034 MVRingDebarker

The USNR MV-Type Ring Debarker gives you excellent inline debarking performance in a great package. Our engineers have designed this debarker for maximum flexibility: our modular design means you get a custom machine at a non-custom price!

 
Norman Disc Chipper
Norman Disc Chipper
Code: MA-33-ENormanDiscChipper

The exclusive, tested design of the USNR Norman Chipper is bringing greater profits to chip manufacturers around the world. Truly uniform chips are the result of the USNR Norman Chipper’s continuous cutting action that makes it the only chipper of its kind!

 
Optimization from Bucking to Grading
Optimization from Bucking to Grading
Code: NM-OP-01-EOptimization

Our comprehensive suite of integrated optimisation systems harnesses technology to create innovative solutions that satisfy today's requirements and set the stage to meet the challenges of tomorrow.

 
Optimized Curved Sawing Systems
Optimized Curved Sawing Systems
Code: E-072 OptimizedCurveSawingSystems

Curve sawing offers increased value, higher volume recovery, longer length side boards, and stronger lumber. Today’s advanced systems meet the challenges in speed, accuracy and recovery.

 
Optimized Edger Systems
Optimized Edger Systems
Code: NM-MA-15-EOptimizedEdgerSystems

High performance edger systems offer fast, reliable and accurate sawing, while new technologies extend system  capabilities to improve downstream processes.

 
Overview
Overview
Code: GE-01-EOverview

USNR is a world leader in the design, manufacturing, and installation of state of the art machinery, dry kilns, control systems, optimisation software, and high-capacity lift trucks for the wood processing industry.

 
Profiling Curve Saw Gangs
Profiling Curve Saw Gangs
Code: NM-MA-13-EProfilingCurveSawGangs

Newnes-McGehee (NM) has expanded its range of curve sawing equipment to include side profiling of the jacket boards. This machine functions with any of our 3 system feed configurations: Linear, Transverse or QuickScan.

 
Quad Arbor Saw Box
Quad Arbor Saw Box
Code: E-039 QuadArborSawBox

USNR's Quad Arbor Sawbox is a circular saw alternative to a quad bandmill that features the new Even Depth of Cut (EDC) technology. This innovation alleviates many of the problems commonly associated with the typical fixed arbor sawboxes.

 
RoboGang™ Curve Sawing Gang
RoboGang™ Curve Sawing Gang
Code: E-094 RoboGang

RoboGang is the next step in the evolution of shape sawing designed by the pioneers of optimized curve sawing technology. The RoboGang concept allows high speed shape sawing in both horizontal and vertical orientation.USNR has applied a new concept to numerically ...

 
Rotary Hog
Rotary Hog
Code: MA-31-ERotaryHog

When it comes to shredding waste material, there just isn’t any better value than USNR’s Rotary Hog. These rugged machines provide maximum production at the lowest cost per ton.

 
Sawmill BioScan System
Sawmill BioScan System
Code: NM-OP-06-ESawmillBioScanSystem

Trimmer and Edger Defect ScanningHighest value optimized decisions with proven grade and recovery performance based on visual defect detection, rules based classification and highly accurate geometric measurements.

 
SGII Charger Table
SGII Charger Table
Code: NM-MA-19-ESGIIChargerTable

The Super-GII charger table is the center piece of the Newnes-McGehee optimised transverse edger line.  It positions flitches accurately at very high cycle rates.  The positioning system eliminates edge crush to maximise recovery.

 
SL2500 Small Log Processor
SL2500 Small Log Processor
Code: E-085 SL2500SmallLogProcessor

USNR's small log processing systems offer production rates and accuracy for today's competitive processors.  As a single source supplier, USNR provides and supports true shape scanning, intuitive controls and robust mechanical components in fully integrated ...

 
Smart TriCam™ Transverse Scanning System
Smart TriCam™ Transverse Scanning System
Code: OP-05-ESmartTriCamTransverse

Most accurate and highest-density 3D transverse scanning system in the industry 

 
TrimMaster G3™
TrimMaster G3™
Code: OP-11-ETrimMasterG3

Hardwood Trimmer OptimiserUSNR brings you the future of optimisation technology with the TrimMaster G3™.  Packed with features that ensure the highest fiber recovery with the ability to control the appearance of your products for maximum grade and ...

 
Trimmer Positioning Fence & Transfer
Trimmer Positioning Fence & Transfer
Code: NM-MA-08-ETrimmerPositioning

The Newnes-McGehee (NM) Trimmer Positioning Fence positions lumber accurately at very high speeds before it enters the Trimmer.

 
True Flow Knife System
True Flow Knife System
Code: MA-10-ETrueFlowConical

Conical Chipper Head Knife USNR's True flow high-performance knife system is an outstanding alternative for either drumstyle or conical chipper heads.

 
True Flow Knife System
True Flow Knife System
Code: MA-11-ETrueFlowDrum

Drum-Style Chipper Knife USNR's True Flow high-performance knife system is an outstanding alternative for either drum style or conical shipper heads.  The True Flow knife system was designed using sophisticated 3D solid modeling CAD software, resulting in a ...

 
USNR Carriage
USNR Carriage
Code: E-020 USNR Carriage

Heavy Duty ConstructionUSNR Log Carriages continue a long-established tradition of superior construction that stands up to the most demanding sawmill environment.

 
USNR Lunden Stacker
USNR Lunden Stacker
Code: E-018

The USNR Lunden Stacker is the original automatic sticker stacker, imitated by many, but matched by none.  The Lunden Stacker System features stickers on the stacker forks and lumber on the stickers when the carriage cycles.  This results in packages of great ...

 
USNR Sharp Chain
USNR Sharp Chain
Code: E-194 USNR Sharp Chain


 
Vee-Chipper Canter System
Vee-Chipper Canter System
Code: E-029 VeeChipper

USNR's Vee-Chipper Canter System continues a long-established tradition of bullet-proof construction that stands up to the most demanding operating cycles. This machine will stand up to the abuse of volume production for many years to come!

 
Vertical Single / Double Arbor Gangs
Vertical Single / Double Arbor Gangs
Code: E-092 VSA-VDAGang

The VSA/VDA gang systems are designed to fit any gangsaw application. Built in the traditional USNR fashion, these vertical gangsaws are rugged, with easy to maintain and operate features. The many options offer customization to suit any sawmill’s particular needs.

 
VSS System
VSS System
Code: E-025 VSS System

Vertical Shape Sawing SystemThe VSS cuts along an optimised path to get the greatest number of high-quality boards out of every log.  The VSS follows the wood grain more accurately, resulting in higher quality lumber than a straight sawing system.  You also ...

 
WaneMaster G3™
WaneMaster G3™
Code: OP-12-EWaneMasterG3

Hardwood Edger OptimizerUSNR brings you the future of optimisation technology with the WaneMaster G3™.  Packed with features that ensure the highest fiber recovery with the ability to control the appearance of your products for maximum grade and value.

 
WinTally
WinTally
Code: NM-MA-16-EWinTally

 WinTally™ is Newnes-McGehee's solution for sorter management in the sawmill and planermill.  Production information is captured by WinTally™ as boards pass into the sorter and arrages data into an organized and logical dtabase.  Information ...

 
YieldMaster G3™ with Stereo Scan™
YieldMaster G3™ with Stereo Scan™
Code: OP-01-EYeildMasterG3

Hardwood Carriage Optimiser.The YeildMaster G3™ system scans and tapers each log precisely according to the grade and targeted products specified by the sawer using our patented StereoScan™ 3-D scanning for headrig carriages.

 
Super Chip Screen
Super Chip Screen
Code: MA-19-ESuperChipScreen

The USNR Super Chip Screen makes a great addition to your mill to take advantage of an important source of income: wood chips. The Super Chip Screen requires minimal maintenance, so you can spend your time and budget elsewhere.

 
(NEW) ERJO 165 SN Chipper
(NEW) ERJO 165 SN Chipper
Code: ERJO-165SN

As agents of ERJO, we are proud to be able to provide: ERJO 165 SN Chipper This chipper has many features, including: • Handles a wide range of materials • Produces uniform size fuel chips • Ideal for automatic furnace feeding • Self-feeding – safe ...

 
(NEW) ERJO 200 SN Chipper
(NEW) ERJO 200 SN Chipper
Code: ERJO-200SN

As agents for ERJO, we are proud to be able to provide: ERJO 200 SN Chipper This chipper has many features, including: • Handling a wide range of materials • Produces uniform size fuel chips • Ideal for furnace feeding • Self-feeding – safe ...

 
(NEW) ERJO Type HSM Chipper Range Horizontal Feed
(NEW) ERJO Type HSM Chipper Range Horizontal Feed
Code: ERJO-HSM

As agents of ERJO, we are proud to provide: ERJO Type HSM Horizontal Feed Chipper Range The ERJO Horizontal Feed Chipper Range produces pulp and board chips as well as fuel chips from edgings, slabs and trimmings. The machines are available in three (3) ...

 
(NEW) ERJO Type VS Drop Feed Chipper Range
(NEW) ERJO Type VS Drop Feed Chipper Range
Code: ERJO-VS

As agents for ERJO, we are proud to provide: ERJO Type VS Chipper This ERJO Drop Feed Chipper produces pulp and board chips as well as fuel chips from edgings, slabs and trimmings. The machines are available in three (3) styles: • The Type VSF – with fan for ...

 
BioLuma™ 2900L Sensor
BioLuma™ 2900L Sensor
Code: E-213 BioLuma

Highest speed transverse HD Laser profiling gives you the best overall performance in the industry. Advanced Transverse Laser Profile Scanning Precise HD laser profile scanning of boards and flitches at scan rates that will more than match today's high speed ...

 
CombiCut Disc
CombiCut Disc
Code: CombiCut-Disc

CombiCut Disc is the chipperhead that combines two technologies - step chipping and spiral chipping. The disc design provides a very high proportion of quality chips, optimum surface finish, low energy consumption and safe operation at all temperatures. Tool change is ...

 
Logmaster HPS Bandmill
Logmaster HPS Bandmill
Code: Logmaster-HPS-Bandmill

Logmaster HPS effectively satisfies your need for high speed bandsaw production. This design maximizes production and performance with its thin saw kerfs, and the result is excellent yields. Logmaster HPS is designed for feed speeds up to 180 m/min (590 feet/min) and ...

 
Sharp Chain Infeed
Sharp Chain Infeed
Code: Sharp-Chain-Infeed

USNR sharp chain systems are designed to maximize chain life and minimize operating costs. When you’re comparing sharp chain systems there are three things you should consider: performance, durability, and operating cost. USNR sharp chain systems deliver them all.

 

Used Equipment - Sawmills

Bruks BS4 chip screen (Sokna)
Bruks BS4 chip screen (Sokna)
Code: 3151

Bruks BS4 chip screen (Sokna)

 
Quad Cam Lugloader
Quad Cam Lugloader
Code: 1414


 
Timber Tech White Pointer TT3 Waste Reducer with discharge screw
Timber Tech White Pointer TT3 Waste Reducer with discharge screw
Code: 1437

- Comes with Augar screw conveyor - Hydraulic power pack included - Can handle waste up to one metre in length - Suitable for a range of industrial applications such as dry mill waste, plywood, particle board, cardboard and paper. Execution of Machinery o Power ...

 
8” USNR Newnes McGehee Curve Sawing Gang
8” USNR Newnes McGehee Curve Sawing Gang
Code: 1439

8” USNR Newnes McGehee Curve Sawing Gang - New 1997, Model SAGCS - Porter Engineering scanner with Hermary heads - Infeed rollcase approx. 100’ long with base for scanner - Gang with 2 x 200 hp (575 volt) 1770 rpm chipping heads - Gang with 2 x 300 hp (575 volt) ...

 
A5 Nicholson Debarker Line
A5 Nicholson Debarker Line
Code: 1452

Model 35IN - A5 Y.O.M. 1988 Includes: - Infeed - Outfeed - Spare main ring seals and bearings - spare roller gears - Infeed/outfeed rollers. Located Country NSW

 
AK Eriksson TB2B Twin Bandsaw
AK Eriksson TB2B Twin Bandsaw
Code: 3178

AK Eriksson twin band resaw type TB2B 1400. Left hand application. Wheel diameter: 1400mm. Wheel width: 150 mm. Incl. Nobel type SBS 40 hydraulic setting for feed work. Manufactured in 1981.

 
Ånhammar Saw Mill
Ånhammar Saw Mill
Code: 3198

Ånhammar Saw Mill Specification Specification Sawline. - Operators cabin - Infeed conveyor for EPC scanner and setting control system - Söderhamn 447 centering infeed with log turning device - Söderhamn reducer bandsaw with quad–bandsaws type 245, ...

 
Arasmith Industries Lily Pad Chipper
Arasmith Industries Lily Pad Chipper
Code: 1454

64” x 50” mouth opening Located in Country NSW

 
Ari DS-72+1 Multi Ripsaw
Ari DS-72+1 Multi Ripsaw
Code: 3125

ARI DS-72+1 multi rip saw

 
ARI KL 13 Slab Resaw
ARI KL 13 Slab Resaw
Code: 3067

ARI tupe KL 13 slab resaw. Max saw blade diameter: 1,300 mm. Hydraulic drive of feed and fence rollers. Incl. main electrical motor and hydraulic power pack.

 
Ari KS-12 Scragg Saw
Ari KS-12 Scragg Saw
Code: 3127

ARI KS -12 scragg saw

 
Ari SKR-600 Chipper Canter
Ari SKR-600 Chipper Canter
Code: 3123

Ari SKR-600 chipper canter. Technical data Max. log diameter............................... 650 mm Min. log length........................................ 2.5 m

 
Ari Vislanda Cant Saws
Ari Vislanda Cant Saws
Code: 3124

Ari vislanda cant saws for side boards and center boards with setting saws inlc. feedworks for curvesawing.

 
ATS Cyclone Dust Extractor
ATS Cyclone Dust Extractor
Code: 1464

ATS Cyclone Dust Extractor Y.O.M. 2005 Includes: - 55kW fan (600mm diameter outlet) - 2 x cyclone ventilators - Horizontal transition pipework - 1 x steel platform

 
Bin Sling Sorter & 2003 Stacker for 8' Wide Packages
Bin Sling Sorter & 2003 Stacker for 8' Wide Packages
Code: 1361

Sling Sorter: 48 bays sling sorter, pusher lug 1992 Bottom chain transfers Stacker: 20' Huot, high speed stacker single forks 2003, 8' wide green packages

 
Bruks 1503 M Disc Chipper
Bruks 1503 M Disc Chipper
Code: 3170

Disc chipper chipper type Bruks 1503 M. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Disc diameter 1480 mm Infeed opening, 420x300 mm Number of knives 3 pcs Number of upper feed rolls 4 pcs Number of upper rolls 6 pcs Chips 30 - 50 ...

 
Bruks 800CM Chipper
Bruks 800CM Chipper
Code: 3208

- Reconditioned - Bottom Outlet - 55 k/w motor

 
Bruks 803 CS Drum Chipper
Bruks 803 CS Drum Chipper
Code: 3172

Drum chipper type Bruks 803 CS incl fan. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Drum diameter 800 mm Infeed opening 540x400 mm Number of knives 4 pcs Chips 30 - 60 m3/h Rated power 55 kW Rated fan power 10 kW

 
Bruks 820 CM Chipper
Bruks 820 CM Chipper
Code: 2184

BRUKS stationary drum chippers are processing different kinds of input materials, like logs, slabs, sawmill wastes, butt ends, veneer wastes and other industrial wood wastes in all wood industry segments.

 
Bruks 820 CM Chipper
Bruks 820 CM Chipper
Code: 2185

BRUKS stationary drum chippers are processing different kinds on input materials, like logs, slabs, sawmill wastes, butt ends, veneer wastes and other industrial wood wastes in all wood industry segments.

 
Bruks Feed Hopper
Bruks Feed Hopper
Code: 3074

Bruks feed hopper with hydraulic dive, 3 kW. Volume: 6 m3.

 
Bruks RR 1000
Bruks RR 1000
Code: 3181

Bruks RR 1000

 
Bruks RR 2000
Bruks RR 2000
Code: 3182

Bruks RR 2000 The machine is in good condition, can be overhauled to excellent condition.

 
Bruks RR 400
Bruks RR 400
Code: 3180

Bruks RR 400 butt end reducer

 
Brunette MKV-35 Debarker
Brunette MKV-35 Debarker
Code: 1310

Heavy duty main frame - RH One piece frame construction Eight feedrolls Four feedroll air cylinders

 
Cambio 500
Cambio 500
Code: 3098

Debarker Cambio 500 AirTen with hydraulic dampers. The machine is overhauled and in excellent condition. New feed rollers and sealings.

 
Cambio 66 Guide Work
Cambio 66 Guide Work
Code: 3117

Debarker Cambio 66 guidework with hydraulic dampers. In working condition or rebuilt!

 
Cambio 70-66 BA
Cambio 70-66 BA
Code: 3013

Reconditioned Cambio 66 BA with hydraulic dampers. Driveunit with new chain, sprockets, shafts and bearings. New rotor bearing. New toolholders, tools Söderhamn Camtool, all new bearings and sealings. Feedwork with new feed rollers, reinforced hubs, new gear kit ...

 
Cambio 71-75 Debarker
Cambio 71-75 Debarker
Code: 2182

This is a heavy duty high capacity debarker.

 
Cambio 75 - Reconditioned
Cambio 75 - Reconditioned
Code: 3158

Totally Reconditioned and Painted 30" - up to 700mm diameter logs

 
Canter-Twin Sawline
Canter-Twin Sawline
Code: 1362

Canter-Twin Sawline: Kockums 6' Twin band saws 1981 shop rebuilt by USNR in 2005

 
Carriage Head Rig
Carriage Head Rig
Code: 1356

Albany 1976/Cleerman 2007, 4 knees, temposonics, new in 2007, ran until 2008.

 
Chipper Canere Small Log Line
Chipper Canere Small Log Line
Code: 3188

Chipper canter small log line Söderhamn log infeed, chipper canter SÖDERHAMN 240-12. 2nd chipper canter SÖDERHAMN 240 – 12. Multi rip saw Vislanda.

 
Chipping Plant
Chipping Plant
Code: 3199


 
Complete Sawmill
Complete Sawmill
Code: 1363

Complete sawmill. Can sell seperately (see items 1356 to 1362).

 
Dry Sorting Line - 30 Pockets
Dry Sorting Line - 30 Pockets
Code: 3155

Complete Forslund drysorting line, 30 pockets. Including stacker, packpress and chipper

 
Edem Vibrating Conveyor
Edem Vibrating Conveyor
Code: 1417

Edem Vibrating Conveyor Length 10.200 Width - 600 Depth – 400

 
EMS 44U
EMS 44U
Code: 3192


 
ERJO 165 Drum Chipper with Feed Conveyor and Waste Hopper
ERJO 165 Drum Chipper with Feed Conveyor and Waste Hopper
Code: 1447

Chipper comes complete with wood waste hopper and feed conveyor. This unit produces 7-10m3 of woodchip per hour

 
Erjo Feed Hopper Type M10
Erjo Feed Hopper Type M10
Code: 3073

Erjo feed hopper type M10. Electric drive 1,5 kW. Capacity 10-30 m3/h.

 
Forester Horizontal Head Rig
Forester Horizontal Head Rig
Code: 1409

4 Inch Blade 700 mm Cutting Width Thin Kerf All new electrics Hydraulic strain

 
Forester Resaw
Forester Resaw
Code: 1410

4 inch Blade Electric driven Hob Motor 15kw Chop guide is adjustable and can cut up to 500mm deep

 
Gibson Twin Breakdown Saw
Gibson Twin Breakdown Saw
Code: 1448

Gibson Twin Breakdown Saw - 6ft Bottom Saw - 100HP - 5ft Top Saw - 75HP - Capacity 1.8 x 7.5 Metre - Log Deck - Winch - 3 Knee Log Carriage - All in Very Good condition.

 
Gockel G40-5475 Grinder
Gockel G40-5475 Grinder
Code: 3209

Model G40-5474 Magnetic table length 2300mm Ex. Sweden

 
Gunnarssons 5m Multisaw Trimmer
Gunnarssons 5m Multisaw Trimmer
Code: 1354

Gunnarssons 5m Multisaw Trimmer Model JV190 Still operational until early 2010.

 
HBS 840 Hogger
HBS 840 Hogger
Code: 2129

HBS 840 Hogger Ex demonstration machine, like new Has been running approx. 25 hours Technical data: Capacity m³/h: 45 - 75 m³ Motor power: 45 - 75 kW Inlet: 840 x 670 mm Outlet: 780 x 715 mm Rotation speed: 1040 rpm Number of flails: 64

 
Head Rig 7 Foot Kockums and Carriage System Tilt
Head Rig 7 Foot Kockums and Carriage System Tilt
Code: 1416

7’ Kockums with extended column CAE Carriage, 3 bunk, 42” Tilt system with slabber Operators Cab Tracks and carriage drive Voltage is 460 Volts Older scanning USNR need replacing This equipment is now dismantled and ready to ship

 
HOLYTEK GRS-320H Multirip Rip Saw
HOLYTEK GRS-320H Multirip Rip Saw
Code: 1449

Technical Details: Max. cutting thickness 10~155 mm Max. cutting width 320 mm Distance from feed track center to column 660 mm Min length of cut 600 mm Feed speed (variable) 6~24 M/min Feed track width 335 mm Sawblade keyway 20mm width x 2 Distance ...

 
Horizontal ReRip Saw
Horizontal ReRip Saw
Code: 1407

Horizontal Rip Saw for sale. Located in South Australia. Machine: Horizontal ReRip Saw Manufacture: Rose Machinery, Oregon

 
Iseli Mecomat 391
Iseli Mecomat 391
Code: 3130

Iseli Mecomat 391 Autoamtic levelling machine for band saw blades –manufacture 1996

 
Iseli SAM Stelite
Iseli SAM Stelite
Code: 3193


 
Iseli SBM - EBW
Iseli SBM - EBW
Code: 3195


 
Iseli SBM - SEM
Iseli SBM - SEM
Code: 3194


 
Klamath 7' Bandmill
Klamath 7' Bandmill
Code: 1311


 
Kockums Chipper Canter
Kockums Chipper Canter
Code: 1461

Kockums Chipper Canter Type 240-12C Recently replaced feed rolls.

 
LH Coe 20' Optimised 3 Saw Edger
LH Coe 20' Optimised 3 Saw Edger
Code: 1357

Left hand Coe, 20' optimized 3 saw edger comes with reman head, 1996 200hp top arbor, 200hp Top Chipping Head. Coe Detec Scanner Automatic Board Tailer

 
LH Optimized Trimmer
LH Optimized Trimmer
Code: 1360

Left Hand Optimized Trimmer: Single board unscrambler 2000 Newnes Revolver lug loader 2000 PHL Industries 20' high speed trimmer 2000 comes with 11 motorized saws 7.5hp (saws ajustable - see pics - note pic for motor specs) D-TEC 20' optimization, scanner DTec ...

 
Lindsaw Resaw Type CR8
Lindsaw Resaw Type CR8
Code: 3057

Single split resaw made by Lindsaw. Type CR 8 incl. in feed conveyor. Max saw blade diameter = 800 mm. Max cutting height = 300 mm. 30 kW electrical motor.

 
Log Debarker Infeeder - New
Log Debarker Infeeder - New
Code: 3052

New log infeed conveyor suitable for logs up to diameter 450 mm. Complete with drive unit and hydraulic power pack. Feed speed 60 m/min.

 
Log Loader with Cams
Log Loader with Cams
Code: 1318

Log Loader with Cams

 
Log Sorting 2x10
Log Sorting 2x10
Code: 3187

Log sorting line 2x10 boxes incl. Rema electronics.

 
Morbark 48
Morbark 48" Chipper
Code: 1420

- Length: 56” - Width: 52” - Height: 55” - Weight: 7,300lbs (approx. 3311kg) - Capacity: 11” roundwood - Spout; 26” dia x 17” wide - 48” Disc diameter - 6 Knives - Max rpm of 875 - Rear discharge "As is, where is" condition

 
Morbark 56
Morbark 56" Chipper
Code: 1421

- Length: 67” - Width: 58” - Height: 65” - Weight: 8,200lbs (approx. 3720 kg) - Capacity: 15” Roundwood - Spout; 32” diag x 22” wide - 58” Disc diameter - 6 Knives - Max rpm of 725 - Bottom discharge "As is, where is". Used Condition.

 
Morbark Mobile Chipper
Morbark Mobile Chipper
Code: 1467

Includes spare parts Machine Ex. Country SA

 
Newnes 20RH Trimmer Lines - 80 Bin Newnes Sorter Lines
Newnes 20RH Trimmer Lines - 80 Bin Newnes Sorter Lines
Code: 1376

Two Newnes 20RH Trimmer Lines Two 80 Bin Newnes Sorter Lines

 
Newnes Optimized Board Edger RH
Newnes Optimized Board Edger RH
Code: 1359

Right Hand, Newnes 20' optimized 3 saw edger comes with reman head, 1998, Newnes Scanner, updates 2004, 30" wide retec, 900 FPM, could be faster but top chip head limits, 20" diameter saw. Top Arbor, 200HP, Chip head 200HP Scanner serial # 98-281-DO, Scanner Model ...

 
Nicholson 54
Nicholson 54" Debarker
Code: 1317

Nicholson 43" Model 'A;. Built in 1954, retrofitted with Nicholson 54" ring in 1992

 
Optimized Docker
Optimized Docker
Code: 1355

C14_MKL CNC cross-cut system.

 
Prescott 5' Bandmill
Prescott 5' Bandmill
Code: 1312


 
Quad Cam Lugoader
Quad Cam Lugoader
Code: 2123


 
Reducer Bandsaw Line
Reducer Bandsaw Line
Code: 3156

Cleaned and loaded in container, Sweden

 
Remill Guidework
Remill Guidework
Code: 3184

Remill guidework for Cambio 66 and 75. In good condition.

 
Resaw-Moulding Line Animskog
Resaw-Moulding Line Animskog
Code: 3197

Re-rip line with a twin line bar Soderhamn AKE resaw along with a lot of handling equipment. AKE used to build the resaws for WACO but it was the lightweight version not this one which is the heavy weight version. Location: Sweden

 
Roller Conveyors
Roller Conveyors
Code: 3175

8 roller conveyor for timber packages

 
Schurman CM&E Slabber
Schurman CM&E Slabber
Code: 1440

Fully serviceable unit. Skookum Technology can help with supply spare parts. - True Flow Chipping Heads. Side Head Specs: - Head RPM: 686 - 4 Knives - Chip Length – 1’ (25mm) NOM - Supplied with a 505UZ TEFC motor

 
Schurman Edger
Schurman Edger
Code: 1397

6" top arbor edger Model No: 6TA48 Available early 2014

 
Signode Strapping Press 700x1280mm
Signode Strapping Press 700x1280mm
Code: 1445

700x1280mm (HxW) Includes strap feeder & bearer inserter All valves and solenoids are intact and working at time of removal

 
Sling Sorting with 24 Pockets
Sling Sorting with 24 Pockets
Code: 3166

Sling sorting with 24 pockets, electric motors

 
Soderhamn Combi Spiral Discs
Soderhamn Combi Spiral Discs
Code: 3147

Combi spiral discs for Söderhamn chipper canter 240 - 12

 
Söderhamn Infeed Conveyor Type 447
Söderhamn Infeed Conveyor Type 447
Code: 3066

Infeed conveyor Söderhamn type 447 for installation in front of reducer band saw, band saw , reducer circular saw or chipper canter and cantfeed either round logs or cants. It has a cebtering and log turning function and consist of 2 sections, one log feeder and one ...

 
Söderhamn log haul conveyor
Söderhamn log haul conveyor
Code: 3176

Söderhamn log haul conveyor approx. 16 m

 
Söderhamn profiling line
Söderhamn profiling line
Code: 3185

Profiling saw line. Söderhamn chipper canter profiling line including log rotator and transport equipment between the machines.

 
Soderhömn 240-12 No 68 858
Soderhömn 240-12 No 68 858
Code: 3024

Söderhamn chipper canter type 240-12 with 2 spiral discs. Max log diameter: 500 mm. Min log length: 2,5 m. Max opening between discs: 400 mm. Canter discs can be replaced with other types when available.

 
SOLD - 36 Stenner Resaw VHL - SOLD
SOLD - 36 Stenner Resaw VHL - SOLD
Code: 1348

Two 36" VHL Resaws in good condition available.

 
SOLD - 4 Head Stenner MHS 9 Horizontal Resaw - SOLD
SOLD - 4 Head Stenner MHS 9 Horizontal Resaw - SOLD
Code: 1436

Ex. Europe Contact Skookum Technology for more details

 
SOLD - 5' L&B Resaw 7
SOLD - 5' L&B Resaw 7
Code: 2108

LETSON & BURPEE (USNR) 5' MOVING BAND MILL

 
SOLD - Almab Stacker - SOLD
SOLD - Almab Stacker - SOLD
Code: 3174

Almab Stacker Pack size 1,2 x 1,2 m Board length 6 m