Contact UsBiofuel (52) Bulk Handling (377) Sawmilling (387)

Category:  Sawmilling  >  Used Equipment  >  Sawmills  >  Primary Breakdown
Sort By
Keyword
Search In

Primary Breakdown

2 Knee McKeeCo Carriage
2 Knee McKeeCo Carriage
Code: 1398

2 Knee McKee Co Carriage - Cable Drive - Panogram Arm - 4.2m Long Carriage Located in Australia

 
3 Knee Kockums Carriage
3 Knee Kockums Carriage
Code: 1399

3 Knee Kockums Carriage - Cable Drive - Patograph Arm - Includes DC Cable Drive Motor 110kW Located in Australia

 
Gibson Twin Breakdown Saw
Gibson Twin Breakdown Saw
Code: 1448

Gibson Twin Breakdown Saw - 6ft Bottom Saw - 100HP - 5ft Top Saw - 75HP - Capacity 1.8 x 7.5 Metre - Log Deck - Winch - 3 Knee Log Carriage - All in Very Good condition.

 

Carriages

Carriage Head Rig
Carriage Head Rig
Code: 1356

Albany 1976/Cleerman 2007, 4 knees, temposonics, new in 2007, ran until 2008.

 
Head Rig 7 Foot Kockums and Carriage System Tilt
Head Rig 7 Foot Kockums and Carriage System Tilt
Code: 1416

7’ Kockums with extended column CAE Carriage, 3 bunk, 42” Tilt system with slabber Operators Cab Tracks and carriage drive Voltage is 460 Volts Older scanning USNR need replacing This equipment is now dismantled and ready to ship

 

Bandmills

Canter-Twin Sawline
Canter-Twin Sawline
Code: 1362

Canter-Twin Sawline: Kockums 6' Twin band saws 1981 shop rebuilt by USNR in 2005

 
Forester Horizontal Head Rig
Forester Horizontal Head Rig
Code: 1409

4 Inch Blade 700 mm Cutting Width Thin Kerf All new electrics Hydraulic strain

 
Forester Resaw
Forester Resaw
Code: 1410

4 inch Blade Electric driven Hob Motor 15kw Chop guide is adjustable and can cut up to 500mm deep

 
Klamath 7' Bandmill
Klamath 7' Bandmill
Code: 1311


 
Prescott 5' Bandmill
Prescott 5' Bandmill
Code: 1312


 

Slabbers & Canters

Ari SKR-600 Chipper Canter
Ari SKR-600 Chipper Canter
Code: 3123

Ari SKR-600 chipper canter. Technical data Max. log diameter............................... 650 mm Min. log length........................................ 2.5 m

 
Kockums Chipper Canter
Kockums Chipper Canter
Code: 1461

Kockums Chipper Canter Type 240-12C Recently replaced feed rolls.

 
Schurman CM&E Slabber
Schurman CM&E Slabber
Code: 1440

Fully serviceable unit. Skookum Technology can help with supply spare parts. - True Flow Chipping Heads. Side Head Specs: - Head RPM: 686 - 4 Knives - Chip Length – 1’ (25mm) NOM - Supplied with a 505UZ TEFC motor

 
Soderhamn Combi Spiral Discs
Soderhamn Combi Spiral Discs
Code: 3147

Combi spiral discs for Söderhamn chipper canter 240 - 12

 
Soderhömn 240-12 No 68 858
Soderhömn 240-12 No 68 858
Code: 3024

Söderhamn chipper canter type 240-12 with 2 spiral discs. Max log diameter: 500 mm. Min log length: 2,5 m. Max opening between discs: 400 mm. Canter discs can be replaced with other types when available.

 

Circular Saws

Ari KS-12 Scragg Saw
Ari KS-12 Scragg Saw
Code: 3127

ARI KS -12 scragg saw